A very neat, clean and simple solution to the cab curtain dilemma! This is a single privacy day/night curtain to go around your cab windows (windscreen and 2 side windows). It is made from the same stretch-fabric as our rear curtain kits so they will match up nicely. It is about 80% black-out and is plenty dark enough for sleeping and having a lie-in! The curtain drop is 95cm and it falls in front of your dashboard to keep the light out.

When not in use this cab curtain simply rolls up and can be stowed away in a cupboard or under the seat. It is much less bulky than the silver screens and goes up in seconds so it's perfect for daytime privacy too. When camping in colder weather it's a good idea to double it up with insulated cab screens.

Notes on fitting:

You will need to drill a 2mm hole for these poppers to ensure they secure tightly and don't come loose. Whilst, our full curtain kits require you to drill a 2.5mm hole for the rails to screw into the van metal, we've found this to be a bit too big for the popper fitting on the cab curtains.

The cab curtain is fixed on with 6 poppers (supplied). One popper goes in each corner of the windscreen and two on each side on the pillars behind the cab seats. The curtain is shaped and elasticated in the top corners to keep it tight and simply drops down vertically. You can then tuck it in front of the steering wheel if you want to.

Features

Stretchy fabric (up to 20% extra height)
Dense weave for good light blocking and excellent thermal properties

Compatibility

Not compatible with the VW Caravelle or Multivan

Includes

Cab curtain
6 Poppers
Screws

" "

These are very high-quality curtains manufactured to our specification to ensure a wonderful finish in your campervan. (Our manufacturer also supplies curtains to Mercedes incorporating the same fabric and design!)

The fabric is stretchy with a fairly dense weave, giving very good light blocking and excellent thermal properties. The stretch feature of these curtains allows up to 20% extra height. The aluminium rails are robust and feature an attractive bevelled edge for a professional finish. Rails come pre-drilled and pre-bent for each window location to make fitting nice and simple.

Don't forget to watch our video below before fitting.

Features

Stretchy fabric (up to 20% extra height)
Dense weave for good light blocking and excellent thermal properties
Robust, aluminium rails with an attractive bevelled edge.
Pre-bent & pre-drilled colour matched rails (labelled top (T) & bottom (B)
Strong gliders come pre-threaded on the curtains to save you time and are easily replaceable if needed.
Low profile fixing screws are included which sit below the level of the gliders in the rail, no there's no risk of snagging

Compatibility

Compatible with the VW Transporter T5 to T6.1 (2003-2024)
Compatible with both short & long wheel base vans
Compatible with standard/high roofs
Not compatible with the VW Caravelle or Multivan
Not compatible with vehicles containing plastic trim/linings around the window fittings.

Includes

1 Pair of curtains for the specified window location (Rear door kits include a pair of curtains & rails for each window - ie. 2 x curtains & 4 x rails).
2 Tiebacks
2 Pre-bent & pre-drilled colour matched rails
Gliders
End stops
Fixing screws
Fitting instructions

" "

Notes on fitting:

This kit will include a curved top rail to fit inside the window indentation with the slider groove facing downwards. The lower rail sits with the groove facing forwards towards the front of the van. Lower rails are pre-bent to go around the wiper motor housing box (the bend is central and may need slightly altered by hand as the motor housing is slightly offset).

Features

Stretchy fabric (up to 20% extra height)
Dense weave for good light blocking and excellent thermal properties
Robust, aluminium rails with an attractive bevelled edge.
Pre-bent & pre-drilled colour matched rails (labelled top (T) & bottom (B)
Strong gliders come pre-threaded on the curtains to save you time and are easily replaceable if needed.
Low profile fixing screws are included which sit below the level of the gliders in the rail, no there's no risk of snagging

Compatibility

Compatible with both short & long wheel base vans
Compatible with standard/high roofs
Not compatible with the VW Caravelle or Multivan
Not suitable for tailgates without wipers. (You will need the tailgate kit without wiper option)
Not compatible with vehicles containing plastic trim/linings around the window fittings.

Includes

1 Pair of curtains for the specified window location
2 Tiebacks
2 Pre-bent & pre-drilled colour matched rails
Gliders
End stops
Fixing screws
Fitting instructions

" "

Our VW T4 DoorStore uses our new and improved design. This new design features recessed holes for the panel fixing clips and smoother edges that curve into the panel for a much neater OEM finish.

Kiravans DoorStores fit straight into the redundant sliding door cavity. Simply remove the factory fitted hardboard panel, pop in your DoorStore, fixing into place with the supplied fixing clips and you will gain loads more storage in a matter of minutes!

Notes on fitting

It's important that once fitted, you check thoroughly that there is no contact between the DoorStore and your van's rear panel when door is slid open. Do not overload the storage pockets as contents may contact the van when door is opened.

FEATURES

Designed by Kiravans & manufactured in the UK
Smooth curved OEM design
Recessed fixing holes
Manufactured using tough textured ABS plastic
OEM finish to compliment your existing panels
Install in minutes using supplied panel fixings / poppers
Great use of space, providing loads of instant extra storage
No loss of living space
Wipe clean in seconds
Space for 7-8mm foam insulation behind the top 2 pockets

COMPATIBILITY

Not compatible with electric doors
Not compatible with wheel arch extenders or vans with plastic cladding
Not compatible with vans with a door release cable routed through the hole in the middle void

INCLUDES

Kiravans VW T4 Transporter DoorStore
20 long panel clips in black
Multilingual fitting guide

" "

How it works

The T5/T6 double swivel is one of our finest products. It gives us a warm glow hearing our customers stories about how it has transformed their van living spaces - without losing all the benefits of the bench seat up front.

The swivel mechanism on a Kiravans swivel is very different to other swivels. It uses a cunning slide and swivel approach so you will need to open the side door to allow the full range of movement. The seat is held securely in position while driving by 4 x specially engineered locking bolts.

Safety

Our double seat swivel is fully tested and has passed all the requirements of TÜV Deutschland. This involved 'in-vehicle' pull testing and a SLED test in Germany. The TÜV certificate can be downloaded below.

In the UK it has also passed seat belt anchorage safety tests conducted by STATUS (The Specialist Testing Facility at Manchester Met Uni) using a pull test on a specialist test rig to EC Directive 76/115/EEC as amended by 2005/41/EEC.

Features

Full TÜV Safety Approval
Self-levelling design to counteract sloping cab floor - making your rotated seat actually comfortable to sit on!
High density, low friction 'glide layer' for ease of rotation
External locking screws
Design protected (UK & EU Registered Design No. 002115790-0001).
Includes solid floor plate & carpet so you can keep all that useful under-seat storage
Fitting instructions - we've listened to your feedback and put a simple QR code on the box to link you to the online fitting instructions and video. We'll also email you these when you place your order.

Compatibility & Specification

Fits all T5/T6 vans including the new 'facelift' models
Designed for original seats only
Compatible alongside a RIB driver seat swivel (the non-offset version)
Rear floor height: clearance for floors up to 20mm thick
Height increase of front seat: 47mm
Total weight: 21Kg
Includes all nuts & bolts needed

Includes Floor Plate & Carpet

What is it? The floor plate & carpet consists of a tin sheet with a perfectly cut piece of carpet to go on top. It fits inside the T5/T6 double seat box. A simple idea that makes a big difference to your under seat storage. Thanks to one of our customers for the clever idea!

What does it do? When you fit your double seat swivel (in a T5/T6) you'll notice that the swivelling mechanism is visible inside your seat base, with a nut sticking up and places that small things could get trapped. This product means no gaps, nowhere for things to get trapped, and (thanks to the carpet) fewer rattles in your van.

Fitting Instructions:

Simply install the double swivel as normal following our fitting guide & video
Place the tin sheet on top of the swivel
Fix the seat on top of the metal sheet and bolt it down (The tin sheet will now be sandwiched between the seat and swivel system
Finally, pop the carpet on top of the metal sheet inside the seat base...
Hey presto, no gaps, nowhere for things to get trapped, and no rattles!

Select Language