Manufactured in France by Scopema, the RIB swivel plate for campervans gets lots of praise on the various forums. In our own experience, we have found these seat swivels to be very robust and rattle-free.

The offset feature of this particular swivel means that the pivot point is offset from the centre by a few centimetres towards the handbrake side of their seat. This means that the seat finishes up facing backwards a bit further from the door. The main advantage is that seats with armrests will spin around more easily. If you have a double seat swivel on the passenger side you should choose the non-offset version, otherwise, there won't be enough room for both seats to swivel backwards.

To rotate the seat, the engine must be turned off, vehicle put in gear and the handbrake released temporarily. Once the seat is facing the rear re-engage handbrake. For seats fitted with up/down height adjustment, you will find that you probably need to pump up the seat height to allow the seat to rotate without the grey plastic trim around the base catching on anything.

Notes on fitting:

There are 2 fixing pins under the original slider that will need to to be cut off and removed. Please also note on some vans it appears that the plastic handbrake covering rubs on the swivel and may need to be removed.

Features

Swivel plate fits between the base and seat slider rails on normal seats
Automatically locks in place facing forward for driving
Pivot point is located offset from the centre
European TUV safety approval

Compatibility

Compatible with X82 Vauxhall Vivaro 2014-2018 / Renault Trafic 2014+ / Fiat Talento 2014+ / Nissan NV300 2014+
Compatible with heated seats & airbags (wires can pass through the centre)

Product Specification

Seat height increase: Approx 23mm
Safety: European TUV safety approval

Includes

Swivel plate
Bolts to fit standard seat boxes

Select Language